There’s often that one spot on a floor that creaks and groans. But there doesn’t have to be. With the right construction adhesive, you can eliminate unpleasant squeaks in both new and existing hardwood floors. A few simple steps can be taken to prevent or repair squeaky floors in homes.
New Construction
Step 1.
Apply a 1/4 –inch continuous line (bead) of construction adhesive such as LIQUID NAILS Subfloor and Deck Construction Adhesive (LN-902) along joists before laying your chosen flooring. When laying hard floors, you will need to apply the adhesive as you work across the floor, one board at a time. For 4’ x 8’ construction materials (sheathing), adhesive can be applied to larger sections at a time.
Step 2.
Fasten sheathing as recommended with desired fasteners.
Step 3.
Allow 24-48 hours for the adhesive to dry before heavy foot traffic.
For Existing Floors
Step 1.
Identify accessible floor joints from the underside of your floor. Note that not all floor joists will be accessible.
Step 2.
Apply a 1/4 –inch bead of construction adhesive such as LIQUID NAILS Subfloor and Deck Construction Adhesive along each side of joists as tight to the flooring as possible.
Step 3.
Allow 24-48 hours for the adhesive to dry.
Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.
Contact LIQUID NAILS®
We know there can be a lot of questions around construction adhesives. We're here to help your project be a success.